Видео

1. what battery to buy in case it bad later

You didn't disassemble anything you just took out the bms. How the heck do you get the plastic off safely

Thank you for video. Keep up good work. This video threw me back 10 years, but a lot has changed in the last decade. Many manufacturers have switched from pure nickel strips to nickel-plated strips or to hilumin nickel strips, primarily for perfecting spot welding in mass production and easy testing. Nickel-plated strips are much easier to weld than pure nickel, especially now that we have pocket spot welders that lack the power for pure nickel. All portable devices, electric scooters, bikes, and scooters should use nickel-plated strips due to the vibrations. Stationary devices can use pure nickel. The problem lies in the spot welding itself. Often, users weld the battery but never find themselves in a situation where they disassemble it and see the mistakes made during welding. For example, one needle might create a weld while another doesn’t. Also, if we suspect that a strip, for example 0.1x8, doesn’t have the capacity to handle the current, why don’t we double it or even use four layers to get 0.4x8? This would surely be better than 0.15x8 of pure nickel. If pure nickel were that good, the cells themselves would be made from pure nickel, but that’s not the case they usually made from hilumin - an electro nickel-plated steel strep. Our standard is 0.15x8 nickel plated steel and I adwise to you that you also use this standard for all battery production , for power tools just double or triple it.

Hey how did you wire the balancing wires? My bms came with a connector that has a jumper on it leaving only 9 wires instead of 11

I’m back for a second time to use this helpful info!

thanks dad

tried this and got cut twice. I guess people like me shouldn't be allowed to handle sharp objects

I have a brought a second hand AEG 8000 series T8DEM842E. It ran one cycle for two hours. Next cycle made screeching sound and then stopped. I heard the motor trying to rotate but the drum not. I opened the side and released the belt. Motor makes sound but did not rotate. Opened the motor 3 magnets were loose. I cleaned the motor and pasted the magnets back. which rotated fine manually. Now on any cycle i choose, drum rotates half round seven-eight times with 15sec interval and stops. And after 5-to 8 minutes the machine turns off. No error code. The heating Icon keeps on blinking during this process. Any Idea ?

I have a v10 and it pulsates on max…replaced motor after watching video, cleaned out any blockages and still pulsates on max?? Any ideas?

Hello everyone. Just diseambled one battery, checked how much ampeehours left - almost 3200 ah, but why does it last for a 3 days? Bateries doesnt discharge themselves, is it problem in PCB, maybe it "knows" how many cycles battery can be used? 😮

Have you tried a 9V battery? I bought LiitoKala Lii-D4XL for the purpose of charging 9V Ni-MH batteries but when I insert an empty or half empty 9V into the charger, the red charging light only appears for 5 seconds and then goes back to green and the battery doesn't charge. The batteries are new. So there is a big problem with at least Lii-4DXL models! I wonder if this one in the video works.

Hi. My battery after one year died. I would like to replace it but there is no information about type of battery. Can you help, please?

Thanks for this, simple fix and helpful!!!

My mother used to say: You guys have Blochitis!! Hey I bought the 15 pro Max. Already a dinosaur in camera terms.

LiitoKala chargers are known to report wrong (fake) internal resistance of the batteries. They are unrealiable for thus! 128 mOhm is also the maximum value LiitoKala can display.

My belt is broken, what is the best way to replace it. You're video helped me a lot to open up the dryer 👍

i ordered a couple “sony” vtc6 batteries from ali express out of curiosity more than anything! i don’t have high hopes!!! anyone ever find true high drain 18650’s on ali express?

Mine is flashing blue and won’t charge does anyone know a solution?

Mine is flashing blue and won’t charge does anyone know a solution?

nothing really new

What does a solid blue light mean?

Same here... I need to replace the motor. Once i blow with a compressor the motor noise is worst, maybe some problem inside

I repaired mine as well. Just be careful when desoldering. I pulled too hard on the old display and ripped off 3 pads from the pcb! Took me hours to fix that with wire strand bridges (like with broken trace repairs).

I can say that this soldering iron is a gem and I don't understand why they don't use them.I have a *Weller TCP 12*/12v,35W / and I don't even know how old it is but after trying it I threw all modern electronic junk/soldering irons/ in the bin.

For me it only works on maximum i dont know what to do

gratulations

I have that same new g30 controller... Xiaodash app works perfectly flashing. Only problem I've had is two of the phase wires melted together next to where they bolt to controller, I just separated them an used high temp heat shrink no damage wS caused. Xiaodash has field weakening,witch is awesome

האם יכלה להיות דרך קלה יותר למצוא היכן המתח נפסק? איך ידעת לאן להסתכל ולחפש?

has anybody has schematics of this powerbank please?

Thank you so much bro u saved my balls

My battery lights up red than nothing after that

Spring washer!

What kind of nickel did you use

These Dysons are pure junk. Work great when new, but after 6 months nothing but problems.

nothing to be shocked. single phase BLDCs are widely used for many application.

Could this be done on Sonoff mini?

Does this hack modify the output to 5v? Does the input continues 110v?

Small and cute. Must be new on market so no huge discounts?

thank you for the tip, i just cleaned the contacts at from the brush and now it is perfect, yesterday i received an aftermarket brush but is not like the original one . i owe you more then a beer

What hall sensor is? Numer on it? Thanks

Hello where buy batterie ninenbot mini plus please ?thank regards

Whats the difference between with headers and without headers

Hello sir, I have g30 battery that I left sit. Followed your video, batteries are low at 3.1v. I tried resetting the bms and it just flashes red and then stops. Will not charge. Am I out of luck?

Hi, VERY helpful video, thanks. What charger are you using ? I've been looking for a charger with variable/high rate discharge feature.

Assuming all these on Ali are fake, but the price is pretty low on them, so if you consider the price is for a 2000mah 10A, it seems like an educated purchase option. Current price is about AUD$2.65 each inc shipping (qty 10 rate) from Ali, while a genuine Sony VTC5 2600mah here comes to AUD$9 each for the same 10 qty rate (after adding shipping). VTC5 2100mah appear discontinued but would have been aud$6.80. I guess the other difference is how long they will last. You get what you pay for, until you don't.

Hello :) would you happen to know the type and specification of the diodes on the rectifier bridge of the power supply?

Hi, is there a way to check the battery percentage?

Thanks for the video. I had again the Thunk, Thunk, Thunk as we had had before. Engineer came out and replaced one of the drum rollers. So when I heard it again I was about to order a wheel when it stopped turning. I remember when the engineer came last time he brought a wheel and a belt. So rather than risk it I ordered a wheel and belt. Using this video I was able to take the machine apart to find the belt had broken. All the wheels were fine. I think this thunk thunk thunk was just the belt fraying on a weak spot and eventually it broke. I had the job done in less than an hour. I bought everything through AEG/Electrolux which worked out about £1.50 more than an online Parts supplier. If you put your machine in the MY AEG page you get full parts listings too. Very helpful.

добрый день. могли бы назвать маркировку микросхемы U12 .как она в миру зовётся?

Nice. The only One that explain how connect wire.